Garden Stone Pavement Sealer Driveway DRY Aqua Natural Finish for Patios Floors

We hold MSDS (Material Safety Data Sheet) for all hazardous goods.No MSDS is required by EU regulation to all neutral products however we can provide on request with wholesale orders.

This service is available upon request as a PDF file.

All our products are labeled in accordance with the new European regulations for Classification, Labeling and Packaging (CLP). 

PREPARATION: Prior to application of sandstone sealer or natural stone sealer ensure surfaces to be sealed are clean, dry and free from contamination. If algae or stains are present pre-treat prior to cleaning with an appropriate cleaning product.

**If applied to a surface where a “sweep-in” pointing compound has been used within the last 6 months, the natural stone must be fully cleaned with Smartseal Residue Remover prior to sealant application.**

APPLICATION: A suitable pressure sprayer or roller is recommended taking care to avoid any pooling. Application on all substrates should be to full saturation and on vertical surfaces commence at the bottom and work upwards.

Remove any excess after approx 30 – 40 minutes.

One coat only is normally required, for best results. Do not apply in damp conditions or at temperatures below 12-15°c. Shake container well before use.

All equipment should be cleaned with water immediately after us